diff options
Diffstat (limited to 'hw/xfree86/doc/devel')
| -rw-r--r-- | hw/xfree86/doc/devel/Makefile.am | 7 | ||||
| -rw-r--r-- | hw/xfree86/doc/devel/Makefile.in | 576 | ||||
| -rw-r--r-- | hw/xfree86/doc/devel/README.DRIcomp | 556 | ||||
| -rw-r--r-- | hw/xfree86/doc/devel/Registry | 409 | ||||
| -rw-r--r-- | hw/xfree86/doc/devel/exa-driver.txt | 94 |
5 files changed, 1642 insertions, 0 deletions
diff --git a/hw/xfree86/doc/devel/Makefile.am b/hw/xfree86/doc/devel/Makefile.am new file mode 100644 index 0000000..c9eca5e --- /dev/null +++ b/hw/xfree86/doc/devel/Makefile.am @@ -0,0 +1,7 @@ +# Documentation for developers that is distributed with the source but +# not installed on the system for end-users + +EXTRA_DIST = \ + Registry \ + exa-driver.txt \ + README.DRIcomp diff --git a/hw/xfree86/doc/devel/Makefile.in b/hw/xfree86/doc/devel/Makefile.in new file mode 100644 index 0000000..c1c4db7 --- /dev/null +++ b/hw/xfree86/doc/devel/Makefile.in @@ -0,0 +1,576 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Documentation for developers that is distributed with the source but +# not installed on the system for end-users +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = hw/xfree86/doc/devel +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ac_define_dir.m4 \ + $(top_srcdir)/m4/ax_tls.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \ + $(top_builddir)/include/xorg-server.h \ + $(top_builddir)/include/dix-config.h \ + $(top_builddir)/include/xorg-config.h \ + $(top_builddir)/include/xkb-config.h \ + $(top_builddir)/include/xwin-config.h \ + $(top_builddir)/include/kdrive-config.h \ + $(top_builddir)/include/version-config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ +ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ +ALLOCA = @ALLOCA@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@ +APPLE_APPLICATION_NAME = @APPLE_APPLICATION_NAME@ +APP_MAN_DIR = @APP_MAN_DIR@ +APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ +AR = @AR@ +ARM_BACKTRACE_CFLAGS = @ARM_BACKTRACE_CFLAGS@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BASE_FONT_PATH = @BASE_FONT_PATH@ +BUILD_DATE = @BUILD_DATE@ +BUILD_TIME = @BUILD_TIME@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CHANGELOG_CMD = @CHANGELOG_CMD@ +COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CWARNFLAGS = @CWARNFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DARWIN_LIBS = @DARWIN_LIBS@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DEFAULT_LIBRARY_PATH = @DEFAULT_LIBRARY_PATH@ +DEFAULT_LOGDIR = @DEFAULT_LOGDIR@ +DEFAULT_LOGPREFIX = @DEFAULT_LOGPREFIX@ +DEFAULT_MODULE_PATH = @DEFAULT_MODULE_PATH@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DGA_CFLAGS = @DGA_CFLAGS@ +DGA_LIBS = @DGA_LIBS@ +DIX_CFLAGS = @DIX_CFLAGS@ +DIX_LIB = @DIX_LIB@ +DLLTOOL = @DLLTOOL@ +DLOPEN_LIBS = @DLOPEN_LIBS@ +DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@ +DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@ +DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@ +DMXMODULES_LIBS = @DMXMODULES_LIBS@ +DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@ +DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@ +DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@ +DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@ +DOXYGEN = @DOXYGEN@ +DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@ +DRI2PROTO_LIBS = @DRI2PROTO_LIBS@ +DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@ +DRIPROTO_LIBS = @DRIPROTO_LIBS@ +DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ +DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ +DRI_CFLAGS = @DRI_CFLAGS@ +DRI_DRIVER_PATH = @DRI_DRIVER_PATH@ +DRI_LIBS = @DRI_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DTRACE = @DTRACE@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILE_MAN_DIR = @FILE_MAN_DIR@ +FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +FONT100DPIDIR = @FONT100DPIDIR@ +FONT75DPIDIR = @FONT75DPIDIR@ +FONTMISCDIR = @FONTMISCDIR@ +FONTOTFDIR = @FONTOTFDIR@ +FONTROOTDIR = @FONTROOTDIR@ +FONTTTFDIR = @FONTTTFDIR@ +FONTTYPE1DIR = @FONTTYPE1DIR@ +FOP = @FOP@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_LIBS = @GLIB_LIBS@ +GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@ +GLX_DEFINES = @GLX_DEFINES@ +GLX_TLS = @GLX_TLS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +HAL_CFLAGS = @HAL_CFLAGS@ +HAL_LIBS = @HAL_LIBS@ +INSTALL = @INSTALL@ +INSTALL_CMD = @INSTALL_CMD@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDRIVE_CFLAGS = @KDRIVE_CFLAGS@ +KDRIVE_INCS = @KDRIVE_INCS@ +KDRIVE_LIBS = @KDRIVE_LIBS@ +KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@ +KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@ +KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@ +LAUNCHD_ID_PREFIX = @LAUNCHD_ID_PREFIX@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ +LIBDRM_LIBS = @LIBDRM_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBSHA1_CFLAGS = @LIBSHA1_CFLAGS@ +LIBSHA1_LIBS = @LIBSHA1_LIBS@ +LIBTOOL = @LIBTOOL@ +LIB_MAN_DIR = @LIB_MAN_DIR@ +LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAIN_LIB = @MAIN_LIB@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MAN_SUBSTS = @MAN_SUBSTS@ +MISC_MAN_DIR = @MISC_MAN_DIR@ +MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJC = @OBJC@ +OBJCCLD = @OBJCCLD@ +OBJCDEPMODE = @OBJCDEPMODE@ +OBJCFLAGS = @OBJCFLAGS@ +OBJCLINK = @OBJCLINK@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ +OPENSSL_LIBS = @OPENSSL_LIBS@ +OS_LIB = @OS_LIB@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ +PCIACCESS_LIBS = @PCIACCESS_LIBS@ +PCI_TXT_IDS_PATH = @PCI_TXT_IDS_PATH@ +PERL = @PERL@ +PIXMAN_CFLAGS = @PIXMAN_CFLAGS@ +PIXMAN_LIBS = @PIXMAN_LIBS@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PROJECTROOT = @PROJECTROOT@ +RANLIB = @RANLIB@ +RAWCPP = @RAWCPP@ +RAWCPPFLAGS = @RAWCPPFLAGS@ +RELEASE_DATE = @RELEASE_DATE@ +SDK_REQUIRED_MODULES = @SDK_REQUIRED_MODULES@ +SED = @SED@ +SELINUX_CFLAGS = @SELINUX_CFLAGS@ +SELINUX_LIBS = @SELINUX_LIBS@ +SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@ +SET_MAKE = @SET_MAKE@ +SHA1_CFLAGS = @SHA1_CFLAGS@ +SHA1_LIBS = @SHA1_LIBS@ +SHELL = @SHELL@ +SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@ +SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@ +STRIP = @STRIP@ +STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@ +SYSCONFDIR = @SYSCONFDIR@ +TSLIB_CFLAGS = @TSLIB_CFLAGS@ +TSLIB_LIBS = @TSLIB_LIBS@ +UDEV_CFLAGS = @UDEV_CFLAGS@ +UDEV_LIBS = @UDEV_LIBS@ +UTILS_SYS_LIBS = @UTILS_SYS_LIBS@ +VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@ +VERSION = @VERSION@ +WINDOWSWM_CFLAGS = @WINDOWSWM_CFLAGS@ +WINDOWSWM_LIBS = @WINDOWSWM_LIBS@ +WINDRES = @WINDRES@ +X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@ +X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@ +XDMCP_CFLAGS = @XDMCP_CFLAGS@ +XDMCP_LIBS = @XDMCP_LIBS@ +XDMXCONFIG_DEP_CFLAGS = @XDMXCONFIG_DEP_CFLAGS@ +XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@ +XDMX_CFLAGS = @XDMX_CFLAGS@ +XDMX_LIBS = @XDMX_LIBS@ +XDMX_SYS_LIBS = @XDMX_SYS_LIBS@ +XEPHYR_CFLAGS = @XEPHYR_CFLAGS@ +XEPHYR_INCS = @XEPHYR_INCS@ +XEPHYR_LIBS = @XEPHYR_LIBS@ +XF86CONFIGDIR = @XF86CONFIGDIR@ +XF86CONFIGFILE = @XF86CONFIGFILE@ +XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@ +XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@ +XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@ +XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@ +XKB_COMPILED_DIR = @XKB_COMPILED_DIR@ +XKM_OUTPUT_DIR = @XKM_OUTPUT_DIR@ +XLIB_CFLAGS = @XLIB_CFLAGS@ +XLIB_LIBS = @XLIB_LIBS@ +XMLTO = @XMLTO@ +XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@ +XNESTMODULES_LIBS = @XNESTMODULES_LIBS@ +XNEST_LIBS = @XNEST_LIBS@ +XNEST_SYS_LIBS = @XNEST_SYS_LIBS@ +XORG_CFLAGS = @XORG_CFLAGS@ +XORG_INCS = @XORG_INCS@ +XORG_LIBS = @XORG_LIBS@ +XORG_MAN_PAGE = @XORG_MAN_PAGE@ +XORG_MODULES_CFLAGS = @XORG_MODULES_CFLAGS@ +XORG_MODULES_LIBS = @XORG_MODULES_LIBS@ +XORG_OS = @XORG_OS@ +XORG_OS_SUBDIR = @XORG_OS_SUBDIR@ +XORG_SGML_PATH = @XORG_SGML_PATH@ +XORG_SYS_LIBS = @XORG_SYS_LIBS@ +XPBPROXY_CFLAGS = @XPBPROXY_CFLAGS@ +XPBPROXY_LIBS = @XPBPROXY_LIBS@ +XQUARTZ_SPARKLE = @XQUARTZ_SPARKLE@ +XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@ +XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@ +XSERVERCFLAGS_CFLAGS = @XSERVERCFLAGS_CFLAGS@ +XSERVERCFLAGS_LIBS = @XSERVERCFLAGS_LIBS@ +XSERVERLIBS_CFLAGS = @XSERVERLIBS_CFLAGS@ +XSERVERLIBS_LIBS = @XSERVERLIBS_LIBS@ +XSERVER_LIBS = @XSERVER_LIBS@ +XSERVER_SYS_LIBS = @XSERVER_SYS_LIBS@ +XSL_STYLESHEET = @XSL_STYLESHEET@ +XTSTEXAMPLES_DEP_CFLAGS = @XTSTEXAMPLES_DEP_CFLAGS@ +XTSTEXAMPLES_DEP_LIBS = @XTSTEXAMPLES_DEP_LIBS@ +XVFB_LIBS = @XVFB_LIBS@ +XVFB_SYS_LIBS = @XVFB_SYS_LIBS@ +XWINMODULES_CFLAGS = @XWINMODULES_CFLAGS@ +XWINMODULES_LIBS = @XWINMODULES_LIBS@ +XWIN_LIBS = @XWIN_LIBS@ +XWIN_SERVER_NAME = @XWIN_SERVER_NAME@ +XWIN_SYS_LIBS = @XWIN_SYS_LIBS@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ +__XCONFIGDIR__ = @__XCONFIGDIR__@ +__XCONFIGFILE__ = @__XCONFIGFILE__@ +abi_ansic = @abi_ansic@ +abi_extension = @abi_extension@ +abi_videodrv = @abi_videodrv@ +abi_xinput = @abi_xinput@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +driverdir = @driverdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +extdir = @extdir@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +moduledir = @moduledir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sdkdir = @sdkdir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +symbol_visibility = @symbol_visibility@ +sysconfdir = @sysconfdir@ +sysconfigdir = @sysconfigdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +EXTRA_DIST = \ + Registry \ + exa-driver.txt \ + README.DRIcomp + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/doc/devel/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign hw/xfree86/doc/devel/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/hw/xfree86/doc/devel/README.DRIcomp b/hw/xfree86/doc/devel/README.DRIcomp new file mode 100644 index 0000000..89f40a7 --- /dev/null +++ b/hw/xfree86/doc/devel/README.DRIcomp @@ -0,0 +1,556 @@ + DRI Compilation Guide + + VA Linux Systems, Inc. Professional Services - Graphics. + + 21 April 2001 + +1. Preamble + +1.1 Copyright + +Copyright 2000-2001 by VA Linux Systems, Inc. All Rights Reserved. + +Permission is granted to make and distribute verbatim copies of this document +provided the copyright notice and this permission notice are preserved on all +copies. + +1.2 Trademarks + +OpenGL is a registered trademark and SGI is a trademark of Silicon Graphics, +Inc. Unix is a registered trademark of The Open Group. The `X' device and X +Window System are trademarks of The Open Group. XFree86 is a trademark of +The XFree86 Project. Linux is a registered trademark of Linus Torvalds. +Intel is a registered trademark of Intel Corporation. 3Dlabs, GLINT, and +Oxygen are either registered trademarks or trademarks of 3Dlabs Inc. Ltd. +3dfx, Voodoo3, Voodoo4, and Voodoo5 are registered trademarks of 3dfx Inter- +active, Incorporated. Matrox is a registered trademark of Matrox Electronic +Systems Ltd. ATI Rage and Radeon is a registered trademark of ATI Technolo- +gies, Inc. All other trademarks mentioned are the property of their respec- +tive owners. + +2. Introduction + +This document describes how to download, compile and install the DRI. The +DRI provides 3D graphics hardware acceleration for the XFree86 project. This +information is intended for experienced Linux developers. Beginners are +probably better off installing precompiled packages. + +Edits, corrections and updates to this document may be mailed to <brian@tung- +stengraphics.com>. + +Last updated on 13 February 2002 by Brian Paul. + +3. Prerequisites + +You'll need the following: + + o An installation of XFree86 4.1 or later. The DRI tree has been pruned + down to minimize its size. But in order to build the DRI tree you need + to have recent X header files, etc. already installed. If you don't + have XFree86 4.1 (or later) installed you can probably install it from + RPMs (or another package format). Or, you can download XFree86 as + sources and compile/install it yourself. + + o At least 200MB of free disk space. If you compile for debugging (the -g + option) then you'll need about 600MB. + + o GCC compiler and related tools. + + o ssh (secure shell) if you're a DRI developer and don't want to use + anonymous CVS download. + + o A 2.4.x Linux Kernel. See below for details. + + o FreeBSD support is not currently being maintained and may not work. + +The DRI 3D drivers generally work on systems with Intel or AMD CPUs. How- +ever, limited support for Alpha and PowerPC support is underway. + +For 3dfx Voodoo hardware, you'll also need the Glide3 runtime library +(libglide3-v3.so for Voodoo3 or libglide3-v5.so for Voodoo4/5). These can be +downloaded from the DRI website. You can compile them yourself, but it's +often a painful process. + +For Matrox G200/G400, Intel i810/i830 or ATI Rage128/Radeon hardware, you'll +also need AGP support in your Linux kernel, either built-in or as a loadable +module. + +4. Linux Kernel Preparation + +Only the Linux 2.4.x kernels are currently supported by the DRI hardware +drivers. 2.5.x kernels may work, but aren't tested. + +Most of the DRI drivers require AGP support and using Intel Pentium III SSE +optimizations also requires an up-to-date Linux kernel. Configuring your +kernel correctly is very important, as features such as SSE optimizations +will be disabled if your kernel does not support them. Thus, if you have a +Pentium III processor, you must configure your kernel for the Pentium III +processor family. + +Building a new Linux kernel can be difficult for beginners but there are +resources on the Internet to help. This document assumes experience with +configuring, building and installing Linux kernels. + +Linux kernels can be downloaded from www.kernel.org + +Here are the basic steps for kernel setup. + + o Download the needed kernel and put it in /usr/src. Create a directory + for the source and unpack it. For example: + + cd /usr/src + rm -f linux + mkdir linux-2.4.x + ln -s linux-2.4.x linux + bzcat linux-2.4.x.tar.bz2 | tar xf - + + It is critical that /usr/src/linux point to your new kernel sources, + otherwise the kernel headers will not be used when building the DRI. + This will almost certainly cause compilation problems. + + o Read /usr/src/linux/Documentation/Changes. This file lists the minimum + requirements for all software packages required to build the kernel. + You must upgrade at least gcc, make, binutils and modutils to at least + the versions specified in this file. The other packages may not be + needed. If you are upgrading from Linux 2.2.x you must upgrade your + modutils package for Linux 2.4.x. + + o Configure your kernel. You might, for example, use make menuconfig and + do the following: + + o Go to Code maturity level options + + o Enable Prompt for development and/or incomplete code/drivers + + o hit ESC to return to the top-level menu + + o Go to Processor type and features + + o Select your processor type from Processor Family + + o hit ESC to return to the top-level menu + + o Go to Character devices + + o Disable Direct Rendering Manager (XFree86 DRI support) since we'll + use the DRI code from the XFree86/DRI tree and will compile it + there. + + o Go to /dev/agpgart (AGP Support) (EXPERIMENTAL) (NEW) + + o Hit SPACE twice to build AGP support into the kernel + + o Enable all chipsets' support for AGP + + o It's recommended that you turn on MTRRs under Processor type and + Features, but not required. + + o Configure the rest of the kernel as required for your system (i.e. Eth- + ernet, SCSI, etc) + + o Exit, saving your kernel configuration. + + o Edit your /etc/lilo.conf file. Make sure you have an image entry as + follows (or similar): + + image=/boot/vmlinuz + label=linux.2.4.x + read-only + root=/dev/hda1 + + The important part is that you have /boot/vmlinuz without a trailing + version number. If this is the first entry in your /etc/lilo.conf AND + you haven't set a default, then this will be your default kernel. + + o Compile the new kernel. + + cd /usr/src/linux-2.4.x + make dep + make bzImage + make modules + make modules_install + make install + + Note that last make command will automatically run lilo for you. + + o Now reboot to use the new kernel. + +5. CPU Architectures + +In general, nothing special has to be done to use the DRI on different CPU +architectures. There are, however, a few optimizations that are CPU-depen- +dent. Mesa will determine at runtime which CPU-dependent optimizations +should be used and enable them where appropriate. + +5.1 Intel Pentium III Features + +The Pentium III SSE instructions are used in optimized vertex transformation +functions in the Mesa-based DRI drivers. On Linux, SSE requires a recent +kernel (such as 2.4.0-test11 or later) both at compile time and runtime. + +5.2 AMD 3DNow! Features + +AMD's 3DNow! instructions are used in optimized vertex transformation func- +tions in the Mesa-based DRI drivers. 3DNow! is supported in most versions of +Linux. + +5.3 Alpha Features + +On newer Alpha processors a significant performance increase can be seen with +the addition of the -mcpu= option to GCC. This option is dependent on the +architecture of the processor. For example, -mcpu=ev6 will build specifi- +cally for the EV6 based AXP's, giving both byte and word alignment access to +the DRI/Mesa drivers. + +To enable this optimization edit your xc/config/host.def file and add the +line: + +#define DefaultGcc2AxpOpt -O2 -mcpu=ev6 + +Additional speed improvements to 3D rendering can be achieved by installing +Compaq's Math Libraries (CPML) which can be obtained from http://www.sup- +port.compaq.com/alpha-tools/software/index.html + +Once installed, you can add this line to your host.def to build with the CPML +libraries: + +#define UseCompaqMathLibrary YES + +The host.def file is explained below. + +6. Downloading the XFree86/DRI CVS Sources + +The DRI project is hosted by SourceForge. The DRI source code, which is a +subset of the XFree86 source tree, is kept in a CVS repository there. + +The DRI CVS sources may be accessed either anonymously or as a registered +SourceForge user. It's recommended that you become a registered SourceForge +user so that you may submit non-anonymous bug reports and can participate in +the mailing lists. + +6.1 Anonymous CVS download: + + 1. Create a directory to store the CVS files: + + cd ~ + mkdir DRI-CVS + + You could put your CVS directory in a different place but we'll use + ~/DRI-CVS/ here. + + 2. Check out the CVS sources: + + cd ~/DRI-CVS + cvs -d:pserver:anonymous@cvs.dri.sourceforge.net:/cvsroot/dri login + (hit ENTER when prompted for a password) + cvs -z3 -d:pserver:anonymous@cvs.dri.sourceforge.net:/cvsroot/dri co xc + + The -z3 flag causes compression to be used in order to reduce the down- + load time. + +6.2 Registered CVS download: + + 1. Create a directory to store the CVS files: + + cd ~ + mkdir DRI-CVS + + You could put your CVS directory in a different place but we'll use + ~/DRI-CVS/ here. + + 2. Set the CVS_RSH environment variable: + + setenv CVS_RSH ssh // if using csh or tcsh + export CVS_RSH=ssh // if using sh or bash + + 3. Check out the CVS sources: + + cd ~/DRI-CVS + cvs -z3 -d:ext:YOURID@cvs.dri.sourceforge.net:/cvsroot/dri co xc + + Replace YOURID with your CVS login name. You'll be prompted to enter + your sourceforge password. + + The -z3 flag causes compression to be used in order to reduce the down- + load time. + +6.3 Updating your CVS sources + +In the future you'll want to occasionally update your local copy of the DRI +source code to get the latest changes. This can be done with: + + cd ~/DRI-CVS + cvs -z3 update -dA xc + +The -d flag causes any new subdirectories to be created and -A causes most +recent trunk sources to be fetched, not branch sources. + +7. Mesa + +Most of the DRI 3D drivers are based on Mesa (the free implementation of the +OpenGL API). The relevant files from Mesa are already included in the +XFree86/DRI source tree. There is no need to download or install the Mesa +source files separately. + +Sometimes a newer version of Mesa will be available than the version included +in XFree86/DRI. Upgrading Mesa within XFree86/DRI is not always straightfor- +ward. It can be an error-prone undertaking, especially for beginners, and is +not generally recommended. The DRI developers will upgrade Mesa when appro- +priate. + +8. Compiling the XFree86/DRI tree + +8.1 Make a build tree + +Rather than placing object files and library files right in the source tree, +they're instead put into a parallel build tree. The build tree is made with +the lndir command: + + cd ~/DRI-CVS + ln -s xc XFree40 + mkdir build + cd build + lndir -silent -ignorelinks ../XFree40 + +The build tree will be populated with symbolic links which point back into +the CVS source tree. + +Advanced users may have several build trees for compiling and testing with +different options. + +8.2 Edit the host.def file + +The ~/DRI-CVS/build/xc/config/cf/host.def file is used to configure the +XFree86 build process. You can change it to customize your build options or +make adjustments for your particular system configuration + +The default host.def file will look something like this: + + #define DefaultCCOptions -Wall + (i386) #define DefaultGcc2i386Opt -O2 + (Alpha) #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 (or similar) + #define LibraryCDebugFlags -O2 + #define BuildServersOnly YES + #define XF86CardDrivers vga tdfx mga ati i810 + #define LinuxDistribution LinuxRedHat + #define DefaultCCOptions -ansi GccWarningOptions -pipe + #define BuildXF86DRI YES + /* Optionally turn these on for debugging */ + /* #define GlxBuiltInTdfx YES */ + /* #define GlxBuiltInMga YES */ + /* #define GlxBuiltInR128 YES */ + /* #define GlxBuiltInRadeon YES */ + /* #define DoLoadableServer NO */ + #define SharedLibFont NO + +The ProjectRoot variable specifies where the XFree86 files will be installed. +We recommend installing the DRI files over your existing XFree86 installation +- it's generally safe to do and less error-prone. This policy is different +than what we used to recommend. + +If XFree86 4.x is not installed in /usr/X11R6/ you'll have to add the follow- +ing to the host.def file: + + #define ProjectRoot pathToYourXFree86installation + +Note the XF86CardDrivers line to be sure your card's driver is listed. + +If you want to enable 3DNow! optimizations in Mesa and the DRI drivers, you +should add the following: + + #define MesaUse3DNow YES + +You don't have to be using an AMD processor in order to enable this option. +The DRI will look for 3DNow! support and runtime and only enable it if appli- +cable. + +If you want to enable SSE optimizations in Mesa and the DRI drivers, you must +upgrade to a Linux 2.4.x kernel. Mesa will verify that SSE is supported by +both your processor and your operating system, but to build Mesa inside the +DRI you need to have the Linux 2.4.x kernel headers in /usr/src/linux. If +you enable SSE optimizations with an earlier version of the Linux kernel in +/usr/src/linux, Mesa will not compile. You have been warned. If you do have +a 2.4.x kernel, you should add the following: + + #define MesaUseSSE YES + +If you want to build the DRM kernel modules as part of the full build pro- +cess, add the following: + + #define BuildXF86DRM YES + +Otherwise, you'll need to build them separately as described below. + +8.3 Compilation + +To compile the complete DRI tree: + + cd ~/DRI-CVS/build/xc/ + make World >& world.log + +Or if you want to watch the compilation progress: + + cd ~/DRI-CVS/build/xc/ + make World >& world.log & + tail -f world.log + +With the default compilation flags it's normal to get a lot of warnings dur- +ing compilation. + +Building will take some time so you may want to go check your email or visit +slashdot. + +WARNING: do not use the -j option with make. It's reported that it does not +work with XFree86/DRI. + +8.4 Check for compilation errors + +Using your text editor, examine world.log for errors by searching for the +pattern ***. + +After fixing the errors, run make World again. Later, you might just compile +parts of the source tree but it's important that the whole tree will build +first. + +If you edited your host.def file to enable automatic building of the DRI ker- +nel module(s), verify that they were built: + + cd ~/DRI-CVS/build/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel + ls + +Otherwise, build them now by running + + cd ~/DRI-CVS/build/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel + make -f Makefile.linux + +For the 3dfx Voodoo, you should see tdfx.o. For the Matrox G200/G400, you +should see mga.o. For the ATI Rage 128, you should see r128.o. For the ATI +Radeon, you should see radeon.o. For the Intel i810, you should see i810.o. + +If the DRI kernel module(s) failed to build you should verify that you're +using the right version of the Linux kernel. The most recent kernels are not +always supported. + +If your build machine is running a different version of the kernel than your +target machine (i.e. 2.2.x vs. 2.4.x), make will select the wrong kernel +source tree. This can be fixed by explicitly setting the value of LINUXDIR. +If the path to your kernel source is /usr/src/linux-2.4.x, + + cd ~/DRI-CVS/build/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel + make -f Makefile.linux LINUXDIR=/usr/src/linux-2.4.x + +or alternatively, edit Makefile.linux to set LINUXDIR before the ifndef LIN- +UXDIR line. + +8.5 DRI kernel module installation + +The DRI kernel modules will be in ~/DRI-CVS/build/xc/pro- +grams/Xserver/hw/xfree86/os-support/linux/drm/kernel/. + +To load the appropriate DRM module in your running kernel you can either use +ismod and restart your X server or copy the kernel module to /lib/mod- +ules/2.4.x/kernel/drivers/char/drm/ then run depmod and restart your X +server. + +Make sure you first unload any older DRI kernel modules that might be already +loaded. + +Note that some DRM modules require that the agpgart module be loaded first. + +9. Normal Installation and Configuration + +Most users will want to install the new X server and use it in place of their +old X server. This section explains how to do that. + +Developers, on the other hand, may just want to test the X server without +actually installing it as their default server. If you want to do that, skip +to the next section. + +9.1 Installation + +Here are the installation commands: + + su + cd ~/DRI-CVS/build/xc + make install + +9.2 Update the XF86Config File + +You may need to edit your XF86Config file to enable the DRI. The config file +is usually installed as /etc/X11/XF86Config-4. See the DRI User Guide for +details, but basically, you need to load the "glx" and "dri" modules and add +a "DRI" section. + +On the DRI web site, in the resources section, you'll find example XF86Config +files for a number of graphics cards. These configuration files also setup +DRI options so it's highly recommended that you look at these examples. + +The XFree86 4.x server can generate a basic configuration file itself. Sim- +ply do this: + + cd /usr/X11R6/bin + ./XFree86 -configure + +A file named /root/XF86Config.new will be created. It should allow you to +try your X server but you'll almost certainly have to edit it. For example, +you should add HorizSync and VertRefresh options to the Monitor section and +Modes options to the Screen section. Also, the ModulePath option in the +Files section should be set to /usr/X11R6/lib/modules. + +9.3 Start the New X Server + +The new X server should be ready to use now. Start your X server in your +usual manner. Often times the startx command is used: + + startx + +10. Testing the Server Without Installing It + +As mentioned at the start of section 9, developers may want to simply run the +X server without installing it. This can save some time and allow you to +keep a number of X servers available for testing. + +10.1 Configuration + +As described in the preceding section, you'll need to create a configuration +file for the new server. Put the XF86Config file in your ~/DRI- +CVS/build/xc/programs/Xserver directory. + +Be sure the ModulePath option in your XF86Config file is set correctly. + +10.2 A Startup Script + +A simple shell script can be used to start the X server. Here's an example. + + #!/bin/sh + export DISPLAY=:0 + ./XFree86 -xf86config XF86Config & \ + sleep 2 + fvwm2 & + xset b off + xmodmap -e "clear mod4" + xsetroot -solid "#00306f" + xterm -geometry 80x40+0+0 + +You might name this script start-dri. Put it in your ~/DRI-CVS/build/xc/pro- +grams/Xserver directory. + +To test the server run the script: + + cd ~/DRI-CVS/build/xc/programs/Xserver + ./start-dri + +For debugging, you may also want to capture the log messages printed by the +server in a file. If you're using the C-shell: + + ./start-dri >& log + +11. Where To Go From Here + +At this point your X server should be up and running with hardware-acceler- +ated direct rendering. Please read the DRI User Guide for information about +trouble shooting and how to use the DRI-enabled X server for 3D applications. + + Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/DRIcomp.sgml,v 1.19 dawes Exp $ + + diff --git a/hw/xfree86/doc/devel/Registry b/hw/xfree86/doc/devel/Registry new file mode 100644 index 0000000..48e24a2 --- /dev/null +++ b/hw/xfree86/doc/devel/Registry @@ -0,0 +1,409 @@ +This is the XFree86 driver/module registry. To avoid name space clashes and +to maintain some consistency between drivers the important name spaces are +maintained here. + +1. Module Names. + +Each module is required to have a unique name. Registered names are: + +GLcore +acecad +afb +apm +ark +ati +atimisc +bitmap +bt8xx +calcomp +cfb +cfb16 +cfb24 +cfb32 +chips +cirrus +citron +cyrix +dbe +ddc +digitaledge +dmc +dri +drm +dynapro +elo2300 +elographics +extmod +fb +fbdev +fbdevhw +fi12x6 +freetype +glide +glint +glx +hyperpen +i128 +i2c +i740 +i810 +imstt +int10 +joystick +keyboard +layer +magellan +magictouch +mfb +mga +microtouch +mouse +msp34xx +mutouch +neomagic +newport +nv +pcidata +penmount +pex5 +r128 +radeon +rac +ramdac +record +rendition +s3 +s3virge +savage +shadow +shadowfb +siliconmotion +sis +spaceorb +speedo +summa +sunbw2 +suncg14 +suncg3 +suncg6 +sunffb +sunleo +suntcx +tdfx +tga +trident +tseng +type1 +v4l +vbe +vesa +vga +vgahw +vmware +void +wacom +xaa +xf1bpp +xf24_32bpp +xf4bpp +xf8_16bpp +xf8_32bpp +xf8_32wid +xie +xtrap +xtt + +2. External Module Object Symbols. + +Each module is required to use a unique prefix or prefixes for all of +its externally visible symbols. They should be unique without regard to +case. Registered prefixes are: + +ati +bt8xx +cfb +chips +fi12x6 +glide +glint +mfb +mga +msp34xx +neo +permedia +tseng +vga +vgahw +vmware +xaa +xf1bpp +xf4bpp + +3. Chipset Names. + +Each video driver is required to use a unique set of chipset names. Case, +white space and underscore characters are ignored when comparing chipset +names. All names listed here are in lower case with all white space and +underscores removed. Registered chipset names are: + +ati +ativga +ct64200 +ct64300 +ct65520 +ct65525 +ct65530 +ct65535 +ct65540 +ct65545 +ct65546 +ct65548 +ct65550 +ct65554 +ct65555 +ct68554 +ct69000 +et4000 +et4000w32 +et4000w32i +et4000w32p +et6000 +et6100 +generic +ibmvga +ibm8514 +mach32 +mach64 +mach8 +mga2064w +mga1064sg +mga2164w +mga2164wagp +neo2070 +neo2090 +neo2093 +neo2097 +neo2160 +neo2200 +tipm2 +vgawonder +voodoo + +4. Option Names. + +Option names and their usage should be consistent between drivers. +Case, white space and underscore characters are ignored when comparing +option names. The prefix "no" may be added or removed from boolean +option names. All names listed here are in their preferred user-visible +form. Some registered option names are: + +Types are: B = boolean, O = set/unset (no value), I = integer, S = string, + A = optional string, F = floating point number Q = frequency + +Scopes are: F = global flags, V = video driver, C = common (per screen), + I = input drivers, X = XAA, Xv = Xv extension, M = misc. + +Names currently in use: + +Name Type Scope Description +---------------------------------------------------------------------------- +AllowMouseOpenFail B F ignore mouse dev open failure +AllowNonLocalModInDev B F allow non-local mod of input devs +AllowNonLocalXvidtune B F allow non-local VidMode connections +BlankTime I F Screen saver timeout (min) +DisableModInDev B F disallow changing input devs +DisableVidModeExtension B F disable VidMode extension +DontVTSwitch B F disable Ctrl-Alt-Fn +DontZap B F disable Ctrl-Alt-BS sequence +DontZoom B F disable Ctrl-Alt-+/- +NoTrapSignals B F don't trap signals +OffTime I F Time before DPMS off mode active (min) +PciProbe1 O F use PCI probe algorithm 1 +PciProbe2 O F use PCI probe algorithm 2 +PciForceConfig1 O F force PCI config type 1 +PciForceConfig2 O F force PCI config type 2 +Pixmap I F depth 24 pixmap size (24 or 32) +StandbyTime I F Time before DPMS standby active (min) +SuspendTime I F Time before DPMS suspend mode active (min) + +BackingStore B C Enable backing store +DDC B C Enable/disable DDC +DDC1 B C Enable/disable DDC1 +DDC2 B C Enable/disable DDC2 +DPMS O C Enable DPMS +MTRR B C Enable/disable setting MTRRs + +BaudRate I I Serial port baud rate +ButtonNumber I I Button number (for touch screen?) +ButtonThreshold I I ?? +ClearDTR O I Clear serial port DTR +ClearRTS O I Clear serial port RTS +DataBits I I Serial port data bits +DemandLoad O I ?? +Device S I Device file name +DeviceName S I Input device name +FlowControl S I Serial flow control ("xon", "none") +Floating B I Device initialised as floating +HistorySize I I ?? +MaxX I I Maximum X coordinate +MaxY I I Maximum Y coordinate +MinX I I Minimum X coordinate +MinY I I Minimum Y coordinate +Parity S I Serial port parity ("odd", "even", "none") +ReportDelay I I ?? +ReportingMode S I may be "raw" or "scaled" +ScreenNumber I I Screen number (for touch screen) +SendCoreEvents B I Send core events +StopBits I I Serial port stop bits +SwapXY B I Swap the X and Y axes +UntouchDelay I I ?? +Vmin I I Tty VMIN +Vtime I I Tty VTIME + + +18BitBus B V ?? +8Plus16 B V Enable depth 8 + depth 16 with overlay +8Plus24 B V Enable depth 8 + depth 24 with overlay +BlockWrite B V Enable/disable block write +ColorKey I V Set the color key for overlay modes +CompositeSync B V Composite sync +CRTDisplay B V Force display on CRT, not LCD +CRTScreen B V Display on CRT, not LCD (Obsolete) +EarlyRasPrecharge O V Early RAS pre-charge +FastDRAM O V Fast DRAM +FifoAggressive O V Aggressive FIFO setting +FifoConservative O V Conservative FIFO setting +FifoModerate O V Moderate FIFO setting +FireGL3000 B V Card is Diamond FireGL3000 +FixPanelSize B V ?? +FPClock8 Q V Flat panel clock for 8bpp fb (MHz) +FPClock16 Q V Flat panel clock for 16bpp fb (MHz) +FPClock24 Q V Flat panel clock for 24bpp fb (MHz) +FPClock32 Q V Flat panel clock for 32bpp fb (MHz) +FPMVRAM O V Fast page mode VRAM +FramebufferWC B V Enable/disable WC for the framebuffer +GlideDevice I V Selects which Voodoo board to use +HiBitHigh O V High clock bit default to set +HiBitLow O V High clock bit default to cleared +HWClocks B V Enable/disable HW clocks +HWCursor B V Enable/disable HW cursor +LateRasPrecharge O V Late RAS pre-charge +Legend O V Card is Legend ET4000 +LCDCenter B V Enable/disable centering for LCD displays +Linear B V Enable/disable linear framebuffer +MCLK Q V Specify the current MCLK value (MHz) +MedDRAM B V Medium speed DRAM +MemCfg1 I V ?? +MemCfg2 I V ?? +MGASDRAM B V Mga card has SDRAM +MMIO B V Enable/disable memory mapped I/O +MMIOCache B V Enable/Disable MMIO cache +MuxThreshold I V Multiplexing threshold (kHz) +NoAccel B V Disable/enable acceleration +NoClockChip B V ?? +NoStretch B V Disable/enable stretching for LCD displays +OnAtExit B V Leave video signal on when exiting server +OverclockMem B V Enable memory overclocking +Overlay A V Enable multi-depth/overlay. An optional + string "M,N" may be specified, where + M, N are the depths. +PanelDisplay B V Force display on LCD +PciBurst B V Enable/disable PCI burst mode +PciRetry B V Enable/disable PCI retries +ProbeClocks B V Force probe for non-programmable clocks +ReferenceClock Q V Clock generator reference frequency +RGBbits I V Number of significant bits per rgb +Rotate S V Rotate the virtual display (CW or CCW) +SetLCDClk Q V Set LCD clock (MHz) +SetMclk Q V Set Memory Clock (MHz) +ShadowFB B V Enable shadow framebuffer layer +ShowCache B V Enable viewing of offscreen memory +ShowOverscan O V Set the overscan area to a visible colour +SlowDRAM O V Slow DRAM +SlowEDODRAM O V Slow EDO DRAM +STN B V STN screen type (??) +SWCursor B V Enable/disable SW cursor +SuspendHack B V ?? +SyncOnGreen B V Enable/disable sync on green +TurboQueue B V Enable/disable turbo queue +UseFBDev B V Use the fbdev driver interface +UseModeLine B V Use Modeline (??) +W32Interleave B V ?? + +Buffers I Xv Number of buffers +Device S Xv Device file name +Expose B Xv Disable occlusion clipping (see DESIGN) +FramesPerSec I Xv Max. refresh frequency + +XAA options. All are of type "O" and scope "X", and are self-explanatory + +XaaNoColor8x8PatternFillRect +XaaNoColor8x8PatternFillTrap +XaaNoCPUToScreenColorExpandFill +XaaNoDashedBresenhamLine +XaaNoDashedTwoPointLine +XaaNoScreenToScreenCopy +XaaNoImageReadRect +XaaNoImageWriteRect +XaaNoMono8x8PatternFillRect +XaaNoMono8x8PatternFillTrap +XaaNoOffscreenPixmaps +XaaNoPixmapCache +XaaNoScanlineCPUToScreenColorExpandFill +XaaNoScanlineImageWriteRect +XaaNoScreenToScreenColorExpandFill +XaaNoSolidBresenhamLine +XaaNoSolidFillRect +XaaNoSolidFillTrap +XaaNoSolidHorVertLine +XaaNoSolidTwoPointLine + + +Names used in previous versions: + +16Clocks +8Clocks +ClkDiv2 +EDO VRAM +ExternDisp +ExtFramBuf +FastVRAM +FavorBitBlt +InternDisp +NoBitBlt +NoFontCache +NoImageBlt +NoMemAccess +NoPciDisconnect +NoPixmapCache +NoProgramClocks +NoSplitXfer +OverrideBIOS +OverrideValidateMode +ProgLcdModeRegs +ProgLcdModeStretch +SlowDRAMrefresh +SlowVRAM +SwapHiBit + + +5. Ramdac Names. + +Ramdac names should be consistent between drivers. Case, white space +and underscore characters are ignored when comparing ramdac names. All +names listed here are in lower case with all white space and underscores +removed. + + +6. Clock Chip Names. + +Clock chip names should be consistent between drivers. Case, white +space and underscore characters are ignored when comparing clock chip +names. All names listed here are in lower case with all white space +and underscores removed. + + + + + +$XFree86: xc/programs/Xserver/hw/xfree86/Registry,v 1.18 2002/04/06 18:31:09 tsi Exp $ diff --git a/hw/xfree86/doc/devel/exa-driver.txt b/hw/xfree86/doc/devel/exa-driver.txt new file mode 100644 index 0000000..048307e --- /dev/null +++ b/hw/xfree86/doc/devel/exa-driver.txt @@ -0,0 +1,94 @@ +Adding EXA support to your X.Org video driver +--------------------------------------------- +EXA (for EXcellent Architecture or Ex-kaa aXeleration Architecture or +whatever) aims to extend the life of the venerable XFree86 video drivers by +introducing a new set of acceleration hooks that efficiently accelerate the X +Render extension, including solid fills, blits within screen memory and to and +from system memory, and Porter-Duff compositing and transform operations. + +Configuration +------------- +A new config file option, AccelMethod, should be added to your driver, to allow +the user to select between the EXA and XAA acceleration APIs. + +Some drivers implement a per-instance useEXA flag to track whether EXA is +active or not. It can be helpful to also conditionalize XAA support with an +ifdef so that it can easily be turned off/removed in the future. + +Setting the flag and checking for AccelMethod can be done in the driver's +Options parsing routine. + +Loading EXA +------------ +EXA drivers in the XFree86 DDX should use the loadable module loader to load +the EXA core. Careful versioning allows the EXA API to be extended without +breaking the ABI for older versions of drivers. Example code for loading EXA: + +static const char *exaSymbols[] = { + "exaDriverAlloc", + "exaDriverInit", + "exaDriverFini", + "exaOffscreenAlloc", + "exaOffscreenFree", + "exaGetPixmapOffset", + "exaGetPixmapPitch", + "exaGetPixmapSize", + "exaMarkSync", + "exaWaitSync", + NULL +}; + + if (info->useEXA) { + info->exaReq.majorversion = 2; + info->exaReq.minorversion = 0; + + if (!LoadSubModule(pScrn->module, "exa", NULL, NULL, NULL, + &info->exaReq, &errmaj, &errmin)) { + LoaderErrorMsg(NULL, "exa", errmaj, errmin); + return FALSE; + } + xf86LoaderReqSymLists(exaSymbols, NULL); + } + +EXA is then initialized using exaDriverAlloc and exaDriverInit. See doxygen +documentation for getting started there. + +Further documentation +------------ +The EXA driver interface and public API is documented using doxygen in +xserver/xorg/exa/. To build the documentation, run: + doxygen -g + doxygen Doxyfile +The resulting documentation will appear an html/index.html under the current +directory. + +EXA initialization +------------------ +Your driver's AccelInit routine must initialize an ExaDriverRec structure if +EXA support is enabled, with appropriate error handling (i.e. NoAccel and +NoXvideo should be set to true if EXA fails to initialize for whatever +reason). + +The AccelInit routine also needs to make sure that there's enough offscreen +memory for certain operations to function, like Xvideo, which should advertise +a maximum size no larger than can be dealt with given the amount of offscreen +memory available. + +EXA and Xv +---------- +Video support becomes easier with EXA since AllocateFBMemory can use +exaOffscreenAlloc directly, freeing a previous area if necessary and +allocating a new one. Likewise, FreeFBMemory can call exaOffscreenFree. + +EXA teardown +------------ +At screen close time, EXA drivers should call exaDriverFini with their screen +pointer, free their EXADriver structure, and do any other necessary teardown. + +EXA misc. +--------- +In many drivers, DGA support will need to be changed to be aware of the new +EXA support. + +Send updates and corrections to Jesse Barnes <jbarnes@virtuousgeek.org> or +just check them in if you have permission. |