summaryrefslogtreecommitdiff
path: root/cura_fast.ini
diff options
context:
space:
mode:
authorJan Huwald <jh@sotun.de>2015-02-25 00:53:47 (GMT)
committerJan Huwald <jh@sotun.de>2015-02-25 00:53:47 (GMT)
commit760389bc5ca029ec3d0e5a39b4bdcae618a4db92 (patch)
treeab654c80e41c6b7541e7720d34bc905d24bc94ad /cura_fast.ini
parent73fb44a0e7c4ff8dda95697441607d4d037569bd (diff)
add cura profile
Diffstat (limited to 'cura_fast.ini')
-rw-r--r--cura_fast.ini150
1 files changed, 150 insertions, 0 deletions
diff --git a/cura_fast.ini b/cura_fast.ini
new file mode 100644
index 0000000..3a09b74
--- /dev/null
+++ b/cura_fast.ini
@@ -0,0 +1,150 @@
+[profile]
+layer_height = 0.1
+wall_thickness = 0.8
+retraction_enable = True
+solid_layer_thickness = 0.5
+fill_density = 20
+nozzle_size = 0.4
+print_speed = 100
+print_temperature = 220
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 70
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 40.0
+retraction_amount = 4.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.02
+bottom_thickness = 0.3
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 150.0
+bottom_layer_speed = 20
+infill_speed = 0.0
+cool_min_layer_time = 5
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 150.0
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_angle = 60
+support_fill_rate = 15
+support_xy_distance = 0.7
+support_z_distance = 0.15
+spiralize = False
+brim_line_count = 20
+raft_margin = 5
+raft_line_spacing = 1.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 0.7
+raft_interface_thickness = 0.2
+raft_interface_linewidth = 0.2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ G92 E0 ;zero the extruded length
+ G1 F200 E3 ;extrude 3mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end.gcode = ;End GCode
+ M104 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+switchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ G92 E0
+ G1 E-36 F5000
+ G92 E0
+ T{extruder}
+ G1 X{new_x} Y{new_y} Z{new_z} F{travel_speed}
+ G1 E36 F5000
+ G92 E0
+
contact: Jan Huwald // Impressum