diff options
Diffstat (limited to 'scripts/uni-build-dependencies.sh')
| -rwxr-xr-x | scripts/uni-build-dependencies.sh | 446 |
1 files changed, 446 insertions, 0 deletions
diff --git a/scripts/uni-build-dependencies.sh b/scripts/uni-build-dependencies.sh new file mode 100755 index 0000000..0c37605 --- /dev/null +++ b/scripts/uni-build-dependencies.sh @@ -0,0 +1,446 @@ + #!/bin/sh -e + +# uni-build-dependencies by don bright 2012. copyright assigned to +# Marius Kintel and Clifford Wolf, 2012. released under the GPL 2, or +# later, as described in the file named 'COPYING' in OpenSCAD's project root. + +# This script builds most dependencies, both libraries and binary tools, +# of OpenSCAD for Linux/BSD. It is based on macosx-build-dependencies.sh +# +# By default it builds under $HOME/openscad_deps. You can alter this by +# setting the BASEDIR environment variable or with the 'out of tree' +# feature +# +# Usage: +# cd openscad +# . ./scripts/setenv-unibuild.sh +# ./scripts/uni-build-dependencies.sh +# +# Out-of-tree usage: +# +# cd somepath +# . /path/to/openscad/scripts/setenv-unibuild.sh +# /path/to/openscad/scripts/uni-build-dependencies.sh +# +# Prerequisites: +# - wget or curl +# - Qt4 +# - gcc +# +# Enable Clang (experimental, only works on linux): +# +# . ./scripts/setenv-unibuild.sh clang +# +# Enable Qt5 (experimental) +# +# . ./scripts/setenv-unibuild.sh qt5 +# + +printUsage() +{ + echo "Usage: $0" + echo +} + +build_bison() +{ + version=$1 + echo "Building bison" $version + cd $BASEDIR/src + rm -rf bison-$version + if [ ! -f bison-$version.tar.gz ]; then + curl --insecure -O http://ftp.gnu.org/gnu/bison/bison-$version.tar.gz + fi + tar zxf bison-$version.tar.gz + cd bison-$version + ./configure --prefix=$DEPLOYDIR + make -j$NUMCPU + make install +} + +build_git() +{ + version=$1 + echo "Building git" $version "..." + cd $BASEDIR/src + rm -rf git-$version + if [ ! -f git-$version.tar.gz ]; then + curl --insecure -O http://git-core.googlecode.com/files/git-$version.tar.gz + fi + tar zxf git-$version.tar.gz + cd git-$version + ./configure --prefix=$DEPLOYDIR + make -j$NUMCPU + make install +} + +build_cmake() +{ + version=$1 + echo "Building cmake" $version "..." + cd $BASEDIR/src + rm -rf cmake-$version + if [ ! -f cmake-$version.tar.gz ]; then + curl --insecure -O http://www.cmake.org/files/v2.8/cmake-$version.tar.gz + fi + tar zxf cmake-$version.tar.gz + cd cmake-$version + mkdir build + cd build + ../configure --prefix=$DEPLOYDIR + make -j$NUMCPU + make install +} + +build_curl() +{ + version=$1 + echo "Building curl" $version "..." + cd $BASEDIR/src + rm -rf curl-$version + if [ ! -f curl-$version.tar.bz2 ]; then + wget http://curl.haxx.se/download/curl-$version.tar.bz2 + fi + tar xjf curl-$version.tar.bz2 + cd curl-$version + mkdir build + cd build + ../configure --prefix=$DEPLOYDIR + make -j$NUMCPU + make install +} + +build_gmp() +{ + version=$1 + if [ -e $DEPLOYDIR/include/gmp.h ]; then + echo "gmp already installed. not building" + return + fi + echo "Building gmp" $version "..." + cd $BASEDIR/src + rm -rf gmp-$version + if [ ! -f gmp-$version.tar.bz2 ]; then + curl --insecure -O ftp://ftp.gmplib.org/pub/gmp-$version/gmp-$version.tar.bz2 + fi + tar xjf gmp-$version.tar.bz2 + cd gmp-$version + mkdir build + cd build + ../configure --prefix=$DEPLOYDIR --enable-cxx + make install +} + +build_mpfr() +{ + version=$1 + if [ -e $DEPLOYDIR/include/mpfr.h ]; then + echo "mpfr already installed. not building" + return + fi + echo "Building mpfr" $version "..." + cd $BASEDIR/src + rm -rf mpfr-$version + if [ ! -f mpfr-$version.tar.bz2 ]; then + curl --insecure -O http://www.mpfr.org/mpfr-$version/mpfr-$version.tar.bz2 + fi + tar xjf mpfr-$version.tar.bz2 + cd mpfr-$version + mkdir build + cd build + ../configure --prefix=$DEPLOYDIR --with-gmp=$DEPLOYDIR + make install + cd .. +} + +build_boost() +{ + if [ -e $DEPLOYDIR/include/boost ]; then + echo "boost already installed. not building" + return + fi + version=$1 + bversion=`echo $version | tr "." "_"` + echo "Building boost" $version "..." + cd $BASEDIR/src + rm -rf boost_$bversion + if [ ! -f boost_$bversion.tar.bz2 ]; then + curl --insecure -LO http://downloads.sourceforge.net/project/boost/boost/$version/boost_$bversion.tar.bz2 + fi + tar xjf boost_$bversion.tar.bz2 + cd boost_$bversion + if [ "`gcc --version|grep 4.7`" ]; then + if [ "`echo $version | grep 1.47`" ]; then + echo gcc 4.7 incompatible with boost 1.47. edit boost version in $0 + exit + fi + fi + # We only need certain portions of boost + ./bootstrap.sh --prefix=$DEPLOYDIR --with-libraries=thread,program_options,filesystem,system,regex + if [ $CXX ]; then + if [ $CXX = "clang++" ]; then + ./b2 -j$NUMCPU toolset=clang install + # ./b2 -j$NUMCPU toolset=clang cxxflags="-stdlib=libc++" linkflags="-stdlib=libc++" install + fi + else + ./b2 -j$NUMCPU + ./b2 install + fi +} + +build_cgal() +{ + if [ -e $DEPLOYDIR/include/CGAL/version.h ]; then + echo "CGAL already installed. not building" + return + fi + version=$1 + echo "Building CGAL" $version "..." + cd $BASEDIR/src + rm -rf CGAL-$version + if [ ! -f CGAL-$version.tar.* ]; then + #4.0.2 + curl --insecure -O https://gforge.inria.fr/frs/download.php/31174/CGAL-$version.tar.bz2 + # 4.0 curl --insecure -O https://gforge.inria.fr/frs/download.php/30387/CGAL-$version.tar.gz + # 3.9 curl --insecure -O https://gforge.inria.fr/frs/download.php/29125/CGAL-$version.tar.gz + # 3.8 curl --insecure -O https://gforge.inria.fr/frs/download.php/28500/CGAL-$version.tar.gz + # 3.7 curl --insecure -O https://gforge.inria.fr/frs/download.php/27641/CGAL-$version.tar.gz + fi + tar jxf CGAL-$version.tar.bz2 + cd CGAL-$version + if [ "`echo $2 | grep use-sys-libs`" ]; then + cmake -DCMAKE_INSTALL_PREFIX=$DEPLOYDIR -DWITH_CGAL_Qt3=OFF -DWITH_CGAL_Qt4=OFF -DWITH_CGAL_ImageIO=OFF -DCMAKE_BUILD_TYPE=Debug + else + cmake -DCMAKE_INSTALL_PREFIX=$DEPLOYDIR -DGMP_INCLUDE_DIR=$DEPLOYDIR/include -DGMP_LIBRARIES=$DEPLOYDIR/lib/libgmp.so -DGMPXX_LIBRARIES=$DEPLOYDIR/lib/libgmpxx.so -DGMPXX_INCLUDE_DIR=$DEPLOYDIR/include -DMPFR_INCLUDE_DIR=$DEPLOYDIR/include -DMPFR_LIBRARIES=$DEPLOYDIR/lib/libmpfr.so -DWITH_CGAL_Qt3=OFF -DWITH_CGAL_Qt4=OFF -DWITH_CGAL_ImageIO=OFF -DBOOST_ROOT=$DEPLOYDIR -DCMAKE_BUILD_TYPE=Debug + fi + make -j$NUMCPU + make install +} + +build_glew() +{ + if [ -e $DEPLOYDIR/include/GL/glew.h ]; then + echo "glew already installed. not building" + return + fi + version=$1 + echo "Building GLEW" $version "..." + cd $BASEDIR/src + rm -rf glew-$version + if [ ! -f glew-$version.tgz ]; then + curl --insecure -LO http://downloads.sourceforge.net/project/glew/glew/$version/glew-$version.tgz + fi + tar xzf glew-$version.tgz + cd glew-$version + mkdir -p $DEPLOYDIR/lib/pkgconfig + + # Glew's makefile is not built for Linux Multiarch. We aren't trying + # to fix everything here, just the test machines OScad normally runs on + + # Fedora 64-bit + if [ "`uname -m | grep 64`" ]; then + if [ -e /usr/lib64/libXmu.so.6 ]; then + sed -ibak s/"\-lXmu"/"\-L\/usr\/lib64\/libXmu.so.6"/ config/Makefile.linux + fi + fi + + # debian hurd i386 + if [ "`uname -m | grep 386`" ]; then + if [ -e /usr/lib/i386-gnu/libXi.so.6 ]; then + sed -ibak s/"-lXi"/"\-L\/usr\/lib\/i386-gnu\/libXi.so.6"/ config/Makefile.gnu + fi + fi + + # clang linux + if [ $CC ]; then + sed -ibak s/"CC = cc"/"# CC = cc"/ config/Makefile.linux + fi + + MAKER=make + if [ "`uname | grep BSD`" ]; then + if [ "`command -v gmake`" ]; then + MAKER=gmake + else + echo "building glew on BSD requires gmake (gnu make)" + exit + fi + fi + + GLEW_DEST=$DEPLOYDIR $MAKER -j$NUMCPU + GLEW_DEST=$DEPLOYDIR $MAKER install +} + +build_opencsg() +{ + if [ -e $DEPLOYDIR/include/opencsg.h ]; then + echo "OpenCSG already installed. not building" + return + fi + version=$1 + echo "Building OpenCSG" $version "..." + cd $BASEDIR/src + rm -rf OpenCSG-$version + if [ ! -f OpenCSG-$version.tar.gz ]; then + curl --insecure -O http://www.opencsg.org/OpenCSG-$version.tar.gz + fi + tar xzf OpenCSG-$version.tar.gz + cd OpenCSG-$version + + # modify the .pro file for qmake, then use qmake to + # manually rebuild the src/Makefile (some systems don't auto-rebuild it) + + cp opencsg.pro opencsg.pro.bak + cat opencsg.pro.bak | sed s/example// > opencsg.pro + + if [ "`command -v qmake-qt4`" ]; then + OPENCSG_QMAKE=qmake-qt4 + elif [ "`command -v qmake4`" ]; then + OPENCSG_QMAKE=qmake4 + else + OPENCSG_QMAKE=qmake + fi + + cd $BASEDIR/src/OpenCSG-$version/src + $OPENCSG_QMAKE + + cd $BASEDIR/src/OpenCSG-$version + $OPENCSG_QMAKE + + make + + ls lib/* include/* + if [ -e lib/.libs ]; then ls lib/.libs/*; fi # netbsd + echo "installing to -->" $DEPLOYDIR + mkdir -p $DEPLOYDIR/lib + mkdir -p $DEPLOYDIR/include + install lib/* $DEPLOYDIR/lib + install include/* $DEPLOYDIR/include + if [ -e lib/.libs ]; then install lib/.libs/* $DEPLOYDIR/lib; fi #netbsd + + cd $BASEDIR +} + +build_eigen() +{ + version=$1 + if [ -e $DEPLOYDIR/include/eigen2 ]; then + if [ `echo $version | grep 2....` ]; then + echo "Eigen2 already installed. not building" + return + fi + fi + if [ -e $DEPLOYDIR/include/eigen3 ]; then + if [ `echo $version | grep 3....` ]; then + echo "Eigen3 already installed. not building" + return + fi + fi + echo "Building eigen" $version "..." + cd $BASEDIR/src + rm -rf eigen-$version + EIGENDIR="none" + if [ $version = "2.0.17" ]; then EIGENDIR=eigen-eigen-b23437e61a07; fi + if [ $version = "3.1.1" ]; then EIGENDIR=eigen-eigen-43d9075b23ef; fi + if [ $EIGENDIR = "none" ]; then + echo Unknown eigen version. Please edit script. + exit 1 + fi + rm -rf ./$EIGENDIR + if [ ! -f eigen-$version.tar.bz2 ]; then + curl --insecure -LO http://bitbucket.org/eigen/eigen/get/$version.tar.bz2 + mv $version.tar.bz2 eigen-$version.tar.bz2 + fi + tar xjf eigen-$version.tar.bz2 + ln -s ./$EIGENDIR eigen-$version + cd eigen-$version + mkdir build + cd build + cmake -DCMAKE_INSTALL_PREFIX=$DEPLOYDIR -DEIGEN_TEST_NO_OPENGL=1 .. + make -j$NUMCPU + make install +} + + +# this section allows 'out of tree' builds, as long as the system has +# the 'dirname' command installed + +if [ "`command -v dirname`" ]; then + OPENSCAD_SCRIPTDIR=`dirname $0` +else + if [ ! -f openscad.pro ]; then + echo "Must be run from the OpenSCAD source root directory (dont have 'dirname')" + exit 1 + else + OPENSCAD_SCRIPTDIR=$PWD + fi +fi + +. $OPENSCAD_SCRIPTDIR/setenv-unibuild.sh # '.' is equivalent to 'source' +SRCDIR=$BASEDIR/src + +if [ ! $NUMCPU ]; then + echo "Note: The NUMCPU environment variable can be set for paralell builds" + NUMCPU=1 +fi + +if [ ! -d $BASEDIR/bin ]; then + mkdir -p $BASEDIR/bin +fi + +echo "Using basedir:" $BASEDIR +echo "Using deploydir:" $DEPLOYDIR +echo "Using srcdir:" $SRCDIR +echo "Number of CPUs for parallel builds:" $NUMCPU +mkdir -p $SRCDIR $DEPLOYDIR + +# this section builds some basic tools, if they are missing or outdated +# they are installed under $BASEDIR/bin which we have added to our PATH + +if [ ! "`command -v curl`" ]; then + build_curl 7.26.0 +fi + +if [ ! "`command -v bison`" ]; then + build_bison 2.6.1 +fi + +# NB! For cmake, also update the actual download URL in the function +if [ ! "`command -v cmake`" ]; then + build_cmake 2.8.8 +fi +if [ "`cmake --version | grep 'version 2.[1-6][^0-9]'`" ]; then + build_cmake 2.8.8 +fi + +# build_git 1.7.10.3 + +# Singly build CGAL or OpenCSG +# (Most systems have all libraries available as packages except CGAL/OpenCSG) +# (They can be built singly here by passing a command line arg to the script) +if [ $1 ]; then + if [ $1 = "cgal" ]; then + build_cgal 4.0.2 use-sys-libs + exit + fi + if [ $1 = "opencsg" ]; then + build_opencsg 1.3.2 + exit + fi +fi + + +# +# Main build of libraries +# edit version numbers here as needed. +# + +build_eigen 3.1.1 +build_gmp 5.0.5 +build_mpfr 3.1.1 +build_boost 1.49.0 +# NB! For CGAL, also update the actual download URL in the function +build_cgal 4.0.2 +build_glew 1.9.0 +build_opencsg 1.3.2 + +echo "OpenSCAD dependencies built and installed to " $BASEDIR |